4G LTE FDD-1800 Single Band Mobile Signal Booster Amplifier Repeater Full Kits
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 set/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Application:To expand signal coverage of 2G/4G LTE FDD- 1800MHz which signal blind areas where signal is weak or unavailable.
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
Now you can reach everywhere with signal boosters!
Features:
1. 300~1500 square meters indoor coverage.
2. Frequency bandwidth of LTE-1800MHZ.
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
2. Frequency bandwidth of LTE-1800MHZ.
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
8. Supports up to (30) users / calls simultaneously.
Specification:
Indoor coverage : 300-1500 m2
Frequency Range :1710-1785MHz,1805-1880MHz
Up-link Gain: 60dB
Down-link Gain: 65dB
Output Power UL: 20dBm, DL: 20dBm
Band Flatness: ≤±6
ALC: 31dB @ 0.1dB step
Time Delay: 1 us
Spurious Emission: Out-Band ≤-36dBm
Power Supply: AC110V～220V to DC+5V/2A
Working Temperature: -25 to+55 C
Humidity: 5-95%
Packing:
1. Repeater unit with power supply.
2. High Gain outdoor antenna.
3. Omni indoor antenna.
4. 5m and 15m RF cables.
5. A manual.
Warranty & Return Policy:
1. Warranty covers replacement within 12 months.
1. Warranty covers replacement within 12 months.
2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.
3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.
4. All unauthorized, no reason, etc. returns are subject to 10% restocking fee.
- Q:The use of Axure RP repeaters
- As long as you find the WiFi list, the connection is fine. The principle is that they will relay transmit a signal, when you connect the log switch relay mode (some repeaters used to relay more than) you can find yourself in the emission signal routing in the WiFi list, after the connection (to be renamed) to achieve the forwarding of the original signal, so as to realize the expansion of a signal enhancement objective.
- Q:Is the repeater located next to the router?
- The repeater acts as an extension signal and increases the signal range, typically from L to a distance from the main router. Generally used to connect with the network, the wireless connection is not mature enough.
- Q:The difference between bridge and relay
- The relay is two points apart too far or not directly between the two bridges, the case of direct transmission, a relay through a device, the signal transmission launch point to the relay point by point relay then transmitted to the receiving point of the situation
- Q:RS485 photoelectric isolation relay
- RS-485 signal after transmission distance or load device with a certain number of signal strength, will have the corresponding attenuation when the signal attenuation to a certain extent, RS-485 interface chip can detect the corresponding signal, resulting in communication failure.
- Q:What is the difference between WiFi signal relay and WLAN extension?
- Meaning is not the same as the two WiFi signal and WLAN a different in fact WIFI is WLANA (wireless LAN alliance) of a trademark, the trademark only support the use of the trademark goods can cooperate each other, and the standard itself actually does not matter, but because the WIFI mainly uses 802.11b the agreement, so people gradually accustomed to using WIFI to call 802.11b protocol. In terms of containment, WIFI is a standard for WLAN, and WIFI is included in WLAN, a new technology adopted in the WLAN protocol. WiFi can cover up to about 300 feet (about 90 meters), WLAN maximum (plus antenna) can go to 5KM.WIFI (WirelessFidelity), also known as the 802.11b standard, its biggest advantage is the high transmission speed can reach 11Mbps, in addition to its effective distance is long, but also compatible with the existing variety of 802.11DSSS equipment. Wireless internet access has become a reality. The coverage of radio waves, Bluetooth radio coverage radius based on very small, only about 50 feet or 15 meters, while the Wi-Fi radius of up to about 300 feet about 90 meters, the office since Needless to say, is also can be used in the whole building. However, with the development of WiFi technology, the scope of WiFi signals will be wider in the future.
- Q:Why does the repeater always drop off?
- Of course, it is possible to run at full speed if the bandwidth between the routers is large and the quality of the signal between the two routers is good. However, in this case, the distance between the two routers should be relatively close, and the antennas should be kept perpendicular to the ground. The best route of sight propagation between the two antennas is guaranteed.
- Q:How is the EDUP2930 repeater relay mode set up?
- First, insert the product on the socket, and the power indicator light shows the normal operation;2, with a laptop computer search and connect the wavlink-repeater signal repeater (repeater and notebook computer or can be directly connected with the cable) (Note: if unable to connect the computer to the IP instead of manual input: 192.168.10.2, after determining the third step);
- Q:How to set up the tplink router's repeater?
- 1, using the Tp-link router B default DHCP server is not opened in AP mode, not for the computer to automatically assign IP addresses, so also need to configure the computer wireless network connection IP address, can log into the router management interface, or the wired connection, the computer wireless network connection IP address is set to 192.168.1.X, subnet mask settings: 255.255.255.0, setup is complete, click OK to take effect.2, connect to the router in the IE browser, enter the 192.168.1.253, enter the default login account and password admin Pulian, open B router management interface.
- Q:How can I find the coverage area of repeaters?
- (1) types of repeater stations for mobile communications;From transmission signals, there are GSM repeater and CDMA repeater station;--- from the installation site to outdoor machines and indoor machines;--- from the transmission bandwidth, there are broadband repeater and selective frequency (selective channel) repeater;--- from the transmission mode, there are vertical repeater, fiber transmission repeater and frequency shift repeater. ?(2) the type of mobile repeater;GSM mobile communication repeater stationGSM mobile communication repeater is a way to solve the blind spot of the base station coverage. The erection of the repeater can not only improve the coverage effect, but also greatly reduce the cost of the investment base station.GSM repeater is a communication device designed to eliminate the small signal blind area or weak signal area of GSM900MHz/1800MHz band mobile communication network. Blind signal is widely used in underground shopping malls, parking lot, subway, tunnel, high-rise buildings, entertainment, office or private residential elevator cannot reach the base station signal, but also has a fairly good coverage for the elimination of weak signal district city due to the impact of the edifice of several rural outdoor local signal shadow Yin the side or outer zone.
- Q:Can networks with master keys expand network signals with wireless repeaters?
- The most important point is that as long as the wireless repeater (wireless AP) access to the upper level network is stable enough, it can expand the wireless network signal.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Similar products
New products
Hot products
Related keywords
You Might Also Like
