API 610 BB2 Centrifugal Oil Pump
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Unit unit
- Supply Capability:
- 3500 Units/Year unit/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
1. Basic Info of API 610 BB2 Centrifugal Oil Pump.
Model NO.: | AY Series |
Working Pressure: | Middle Pressure Pump |
Position of Pump Shaft: | Vertical Pump |
Impeller Number: | Single-Stage Pump |
Influent Type of Impeller: | Single Suction Pump |
Working Temperature: | - 45~400 Degree Centigrade |
Capacity: | 2~600 M3/H |
Head: | 15~330 M |
Export Markets: | Global |
2. Additional Info of API 610 BB2 Centrifugal Oil Pump.
Trademark: | CNBM Pump |
Packing: | Standard Export Wooden Case |
Origin: | China |
Production Capacity: | 3500 Units/Year |
3. General of API 610 BB2 Centrifugal Oil Pump
There are six models of AY series oil pumps differing from their structures as listed in following table:
1) Single stage single suction
2) Single stage double suction
3) Double stage single suction
4) Double stage double suction
4. Performance of API 610 BB2 Centrifugal Oil Pump:
Capacity: Q = 2~600 m3/h
Head: H =15~330 m
Working temperature: T = - 45~400 degree centigrade
5. Application of API 610 BB2 Centrifugal Oil Pump:
1) Hydro-fining
2) Petrochemical industry
3) Chemical fiber and common industry process
4) Power plants
- Q:The car burning oil pump replacement must do
- This is mainly to see if there is a problem, no problem, you do not have to change, and hope to adopt!
- Q:My motorcycle two pedal 50, the oil pump has broken down, would you please add some bottle cap oil to the gas tank?
- You just add 2T oil directly to the gasoline tank. If the smoke is too big, add some more gasoline. If you don't smoke, add some more oil. Try to add a little less, because with it, for fear of inadequate lubrication, easy to scratch. The increase is easily broken a spark plug.
- Q:3000 Zhijun hydraulic top rattled, replaced the hydraulic top oil pump, filter base cleaning, cleaning oil. Still ring.
- Estimation is steel roof deformation, shaft seal wear need to check and top steel pillar joints without oil
- Q:What are the markings on the fuel pump and the oil pump? They can be recognized at once
- It looks different
- Q:First question: I mean the turn key, the engine doesn't work, the seconds when the starter works. Does the oil pump inject oil into the engine during this time? Or wait until the engine is fully started to inject lubrication?The second question: because now the cold weather, I saw a forum of northeast riders turn the key to the starter operation recommendations for 1-2 seconds, then later normal launch, said that this can reduce engine wear, do this operation is correct?
- 1, the pump is driven by the engine, has not formed the oil pressure, ah, fuel injection ah. 2, no oil pressure, lubricating oil does not work, using the starter to drive the engine, and more can not help lubrication, you think it is a motorcycle ah?. In addition low temperature starting, oil pressure has not reached, and the oil temperature is low, poor mobility, no fuel injection, in order not to affect the lubrication oil does not flow through a filter, so the oil containing impurities, if the vehicle is harmful to the engine oil pressure, so only the lamp before driving, hot to hot oil and reached the normal working temperature.
- Q:07 years of A4 1.8T. Cold start is not sound, after a few minutes to normal temperature will appear abnormal sound, especially when on the road uphill. The throttle speed will be a strong metal came "crashed" knocking at 1800 to 2200 (window to hear), very annoying. Go to the garage to the handbrake tension half clutch throttle to 2000 rpm, the master said to be in the engine sound, estimated to be reason for oil pump, please master can analyze is not the case. Thanks a million.
- Derek, you said, this may be due to the replacement of the clutch three piece set, the right bridge vehicle problems caused by the phenomenon of failure, so I suggest you go to the 4S shop to remove the right wheel axle to check the cause of the failure.
- Q:Is it not the oil pump with the wrong oil hole Doutong.
- There may be oil pump seal or improper installation, improper installation, dismantling and repair of seal oil pump accidentally blocked the engine box at the oil channel or at the bottom of the engine oil filter, oil pump oil leakage is not installed can not form the oil pressure will cause pump oil, to remove the place to check.
- Q:TOYOTA oil pump not going off
- Replace a lot of oil, try to see if the oil can not be oiled to prove that the oil road is blocked or the oil pump screen is blocked
- Q:How tight is the screw for the car engine oil pump?
- Hello, usually 50 to 70 or so,
- Q:Where is the oil pump installed?
- There are two positions: one is mounted on the lower plane of the cylinder (also called the crankcase), and the two is at the front end of the crankshaft
1. Manufacturer Overview |
|
---|---|
Location | Liaoning,China |
Year Established | 1990 |
Annual Output Value | |
Main Markets | Russia, Iran, north Korea, Vietnam, Sudan |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
Hot Searches
Related keywords
You Might Also Like