China Double Sided PE Foam Tape DSP-10YM

Quick Details Of China Double Sided PE Foam Tape DSP-10YM:

1. DS PE foam tape is with solvent acrylic adhesive. Hot melt adhesive is also available as per customer's requirement.

2. We can offer two kinds of release liner: PE release film & release paper.

3. The foam is of white color and black color. Usually the PE release film is of red color, green color and blue color. The release paper is of white color and yellow color. So, you can match the foam & the release liner as you like, such as black foam + red PE release film or white foam + white release paper.

4. Different foam density available, such as 32kg/m3 (30expansion), 64kg/m3 (15expansion) & 96kg/m3 (10expansion).

5. DS PE foam tape is used for auto trim attachment, signs, stoplights assembly, furniture industry and so on.

6. Two standard ways for cut roll packing: one roll per shrink & one roll per plastic bag. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.

CONSTRUCTION Of China Double Sided PE Foam Tape DSP-10YM:

Backing: White/Black PE Foam

Adhesive: Solvent based acrylic adhesive

Liner: Red/Green/Blue PE liner, Yellow/white paper

TYPICAL PHYSICAL PROPERTIES Of China Double Sided PE Foam Tape DSP-10YM:

Total Thickness (adhesives + backing): 1 mm

Density: 96kg/m3

180° Peel Adhesion: more than 1.0 kg/25mm

Holding power: not less than 100h

Temperature resistance: -20~+100C

Elongation: 300%

Sizes:

Jumbo Roll: 1.00 x 300m

Cut Roll: As per customer's requirements

Remarks Of China Double Sided PE Foam Tape DSP-10YM:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.