Diesel Reversible Plate Compactor
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 Units pc
- Supply Capability:
- 200 Units per Month pc/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Detailed Product Description
1.Diesel Reversible Plate Compactor
2.Operation Weight 450kg
3.Plate Width 50cm
4.Centrifugal Force 50kN
5.CE Cetification
Model | CPC-405-DC |
Engine | Air-cooled, 4-cycle, single cylinder |
Engine Type | Changfa CF186FE, Diesel |
Power kw (hp) | 6.5(10.0) |
Weight kg (lb) | 450(990) |
Frequency vpm | 4400 |
Centrifugal Force kN | 50.0 |
Compaction Depth cm(in) | 90(35) |
Travel Speed cm/s (in/s) | 40(16) |
Efficiency m2 /hr(ft2/hr) | 650(6950) |
Plate Size mm(in) | 900x500 (35x20) |
Dimension mm(in) | 1610x500x930(63x20x37) |
- Q:after a period of time, the heating of the motor leakage protection trip (acceptedwithout good). After cooling for a period of time, is it possible that the motor insulation value is small? 20Vertical rammer, after a period of time, the heating of the motor leakage protection trip (acceptedwithout good). After cooling, can use for a period of time again, is the motor insulation value small and overloaded?
- Hello,- * the motor insulation has reached a critical point, the maintenance of electrical insulation properties...... according to explanation, the electrical insulation resistance with temperature rising and declining trend. It is obvious that the insulation of this motor has reached the limit of the leakage protector. It should be repaired immediately so as to avoid accident due to the malfunction of the protector.
- Q:The slope, there is a tamper budget, is the ramming area is how calculated?Because is the rammer labor costs so much to calculate the consolidation area altogetherIn particular, the area needed to fill the slope (I would like to know what the area is) rather than the entire surface area
- No matter how many layers, the floor area of the ground surface is constant, so the area required by the ground surface is calculated.
- Q:Gasoline rammer black smoke is what reason
- Can't it start?.. Or what? It can't start. Look at the oil, the electricity, the starting machine.. Just these things.. Miow
- Q:What materials need to tamper
- Dig into the required depth. And then put to reinforce the foundation, and then the wall so as not to affect the safety of buildings after land subsidence.
- Q:Carburetor gasoline leak automatic ramming machine
- The height of the float chamber is too high
- Q:The story of a ramming machine on the trip what's wrong.
- Value, and insulation and casing, take a look at what you do not understand can ask me again, I hope to help you, also hope you click adoption
- Q:What should be noted in the operation ramming machine construction?
- (4) when the rammer is operated, no one in the front of the machine shall be 2m, and when the multiple rammer is rammed, the left and right distance of the machine shall not be less than 5m, and the operators shall wear insulating shoes and wear insulating gloves.(5) the random power line should maintain the margin of 3-4m. When the power cord is winding and broken, the power should be cut off in time, and the operation should be stopped and repaired immediately.(6) before the ram tamper, power off, tie up the eccentric block and wire the cable. After work, power off, lock, put in the dry place.
- Q:Do not pull a gasoline rammer
- If you do not describe your problem clearly, there is no way to help you.
- Q:Buy a second-hand caterpillar crane rammer, about how much money
- Take a look at the used car market, a penny a cargo, must see the object and then bid, so as not to be deceived, used car remember not online shopping.A high quality steel wire rope should be used by a crane user. It should be a steel wire rope with long service life and high quality and stability.
- Q:Vertical rammer leakage repair
- First, check if there is an oil leak outside.Pay particular attention to whether the oil seal at the front and back of the crankshaft leaks. The front end of the crankshaft is broken, damaged, worn or worn by the crankshaft pulley and the oil seal, causing the front end of the crankshaft to leak oil. The oil seal at the rear of the crankshaft is broken or damaged, and the oil return hole of the rear main bearing cap is too small, and the oil return is blocked, causing the rear end of the crankshaft to leak oil.
We focus on development, design, manufacture, sales, after-sales service and so on, to supply premium products to our customers. We would like to supply competitive cost and premium quality products to our customers. So, if you have any question or requirement, please feel free to contact us at anytime. We will reply you at first time.
.
1. Manufacturer Overview |
|
---|---|
Location | Beijing, China |
Year Established | 2001 |
Annual Output Value | |
Main Markets | South America Eastern Europe Southeast Asia Mid East Western Europe Southern Europe South Asia |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | 81% - 90% |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | 5,000-10,000 square meters |
No. of Production Lines | |
Contract Manufacturing | OEM Service Offered |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
Hot Searches
Related keywords
You Might Also Like