Fisrt Class 304 cold rolled stainless steel coil
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 1000 m.t./month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Detail of item:
Article | 304 cold rolling stainless steel coil |
Surface | 2B/BA/HL/No.4/4K/6K/8K |
Technique | Cold rolling |
Length | 0-6000mm |
Width | 1m/1.219m/1.5m |
Thickness | 0.3-3.0mm |
Application | Food industry equipment,Ordinary chemical equipment,building |
Packing | Stainless steel coil will use water-proof paper, steel strip packed, wooden case. Or as your requirements. |
Payment | Small quantity (within total $20000.00): T/T at sight, 30% in advance , 70% after receiving the B/L Large quantity : L/C at sight |
Container Size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) |
Delivery Time | 7-15 days after received L/C or the deposit of T/T or WU |
Note | We can produce by other standards or according to your requirement |
Chemical composition :
Grade | C (Max) | Mn (Max) | P (Max) | S (Max) | Si (Max) | Cr | Ni | Mo | Nitrogen (Max) | Cu/ Others |
201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1 | 16.00-18.00 | 3.50-5.50 | - | 0.25 | |
202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1 | 17.00-19.00 | 4.00-6.00 | - | 0.25 | |
301 | 0.15 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 6.00 - 8.00 | - | 0.1 | - |
304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00- 10.50 | - | 0.1 | - |
304L | 0.03 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00- 12.00 | - | 0.1 | - |
310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00- 26.00 | 19.00-22.00 | - | - | - |
316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 | 0.1 | - |
316L | 0.03 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 | 0.1 | - |
316Ti | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 | 0.1 | Ti5x C Min |
317 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 14.00 | 3.00 - 4.00 | 0.1 | - |
317L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 15.00 | 3.00 - 4.00 | 0.1 | - |
321 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 - 19.00 | 9.00 - 12.00 | - | 0.1 | Ti5xC Min |
347 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 - 19.00 | 9.00 - 13.00 | - |
- Q:How can 304 stainless steel and 201 stainless steel be distinguished by magnet?
- Magnets can basically distinguish between the two types of stainless steel. Because 201 stainless steel (chromium, stainless steel) in any state can be attracted by magnets; 304 stainless steel (chromium nickel stainless steel) in the annealing state is generally non-magnetic, and after cold processing, some will be magnetic. However, the manganese steel with high manganese content is non-magnetic; the magnetic properties of chromium, nickel and nitrogen stainless steel are more complex: some are non-magnetic, some are magnetic, some are without magnetism and the surface is magnetic. Therefore, although the basic difference between magnet chromium and chromium nickel stainless steel, but can not distinguish between some special properties, but not distinguish the concrete steel.
- Q:Does the 301 stainless steel band contain magnetism?
- 301 austenitic stainless steel, with slight magnetism. The austenite belongs to the BCC crystal, generated in the above the Curie point, Curie point magnetic transition point, so the austenite is not magnetic, but specific to the austenitic stainless steel, because of a great relationship and Cr stainless steel corrosion resistance elements, Cr ferrite forming elements, so that the austenitic stainless steel will have at least 5% or so the ferrite, so it has slight magnetic magnet can be found out.
- Q:Why does the stainless steel after processing have magnetism?
- The austenite is non-magnetic or weakly magnetic, and martensite or ferrite is magnetic, a tripod of stainless steel processing in processing time due to melting segregation or improper heat treatment, will cause a small amount of martensite Austenitic 304 stainless steel body or ferrite. In this way, 304 stainless steel will have a weak magnetic.
- Q:Stainless steel strap easy to scrape, how to deal with?
- Hand tools also pay attention to, recommend the use of hemostatic forceps to surgery, just take a piece of sandpaper, folded after the use of hemostatic clamp tightly, parallel to the original lines do pull sand, sapphire glass is hard, can not consider it, but watch the shell is made of stainless steel, must pay attention to the operation, can not be it is necessary to draw rub, available cover tape. The technical aspect is that all the sand grains must go up all the time, and all of them are in the center of the dial and radiate.
- Q:Do you have stainless steel with magnetic?
- The chromium content of ferritic stainless steel (400 Series) is 15%~30%, and has the structure of body centered cubic crystal. This kind of steel does not contain nickel, sometimes also contain a small amount of Mo, Ti, Nb and other elements, this kind of steel has high heat conductivity, low expansion coefficient, good oxidation resistance and anti stress excellent characteristics of stress corrosion, used formanufacturingthecorrosionresistanceofthe atmosphere, water vapor, waterandoxidizing parts.
- Q:The difference between stainless steel and cold rolled steel strip
- Stainless steel: the surface appearance and the possibility of the use of various good corrosion resistance than ordinary steel, durable good corrosion resistance and high strength, so the possibility of using large sheet of high temperature oxidation resistant and high strength, it can fire resistant temperature processing, plastic processing is easy because without surface treatment, so simple, maintenance is simple and clean, bright and clean a high degree of good welding performance.
- Q:Which stainless steel belt has better elasticity?
- In stainless steel strips, SUS301 has the best elasticity, and is used for springs, springs, or EH, or spring.
- Q:Is there any magnetism in stainless steel?
- Stainless steel is becoming more and more popular because of its beautiful appearance, corrosion resistance and not easy to damage. More and more pots, city sculpture, architecture, etc. the use of stainless steel decoration room. Some customers in the purchase of stainless steel kitchenware, holding a magnet on stainless steel utensils to absorb. That the magnet is on the stainless iron, not stainless steel, stainless steel are not magnetic. In fact, this is the misunderstanding of stainless steel.
- Q:What are the main stainless steel belt used in the industry and products?
- Judging from the industry composition of stainless steel consumption, the automotive industry is the fastest growing area of stainless steel application. Chinese household electrical appliance industry is a potential big market for stainless steel applications. In addition, the demand for stainless steel in the water industry, construction and construction industry, environmental protection industry and industrial facilities will also increase year by year. Specifically:
- Q:What kind of plastic surface friction and wear in stainless steel belt is relatively small?
- No solid modification of pure plastic on the surface of stainless steel wear is relatively small, such as polyethylene, PTFE and so on.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
Related keywords
You Might Also Like