PE protective flim TR-60
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Total Thickness (adhesives + carrier): 60+10%micron
Colour: clear
Density 0.95g /cm3
Tensile Strength (Long): >10Mpa
Tensile Strength (Trasv): >8Mpa
Adhesion (to stainless steel):100g/25mm
Elongation at break-MD: >200%
Elogation at break-CD: > 350%
Static Shear 23 DC: >48 hours
Storage: 35 DC
Humidity: 80%
Shelf: 6 months
- Q:How to remove the mobile phone protection film?
- Slowly should be able to get down, and the latter affixed to the film affixed to the tight, may not be easy to tear down, you can use a little alcohol, oh, so OK.
- Q:nan
- It's up to you. If you like it clean, then keep it coated. If you want to see the protective film without anything covering it, you can just tear off the film.
- Q:nan
- To buy a new scoth tape and use it to clean up.
- Q:How to remove the shadow of the keyboard protection screen in the notebook screen?. With the lid on, after a night, there was a watermark, which was of poor quality
- Can be washed with alcohol, we do mobile phone screen, the screen is dirty with alcohol wipe, afraid of, dilute it, can also be replaced by wine, nothing, do not get too much on the line! Otherwise, it's not good to get in from the side!
- Q:nan
- The surface quality of drawing dies of stainless steel is highly required. Rough surface can decrease friction and increase the property of adhesive resistance. Therefore, after the grinding processing, the more important work is to remove the processing marks left on the drawing dies. However, few people know the importance of the grinding and polishing processes when making dies. Throughout the whole process, the proportion of grinding and polishing processes should reach one third because the appearance quality of stainless steel products,to a large extent, is determined by the grinding and polishing techniques of making dies. The rougher the surface of dies is, the less it needs re-grinding. And the life of the dies also extends accordingly. If the surface of dies is not well grinded and polished, the marks on the drawn products will be clear. Although there's something to do with the fact that drawing stainless steel can easily cause seizing tumour, too. And to polish these marks takes time and the result is not good. Thus we should pay more attention to the grinding and polishing processes. Only when the surface processing precision of dies improves, can the marks decrease and the life of dies extend. In recent years, various new polishing techniques and polishing tools have arised at home. New processes and equipments such as ultrasonic polishing, electropolishing, abrasive jet and extrusion honing have been developed.
- Q:Protective film on computer screen
- And before the CRT's radiation, because the CRT display is using a kinescope electron gun using high-speed electron emission, through vertical and horizontal deflection coil control deflection angle of high-speed electron, phosphor screen of the high-speed electronic strike finally make the light, resulting in images.If you want to protect your eyes, try to use the computer as little as possible. When you use it, keep your eyes away from the screen.
- Q:Fire door finished surface with a layer of protective film is not good to tear
- 1, it is recommended to tear a corner, in the membrane and the door at the sticky point, pour alcohol, slowly tear.2, or with hot towel hot compress, use the hair dryer blow, also can more easily tear off.3, boiling water method. Suitable for steel, stainless steel, wooden can not use this method.4. Iron with iron. All doors fit.
- Q:Bought last year's cabinet, outside the layer of protective film for a long time, can not tear down, how to do?
- First use the hot air blower, and then use the card shovel1 use a hair dryer blowing hot air on the protective film protective film with ten or so, the hand ripped a hole;
- Q:nan
- Whether it is color or PET transparent protective film and protected products between the paste is not strong, will appear off phenomenon during the transportation and use, the possibility of viscosity sensitive adhesive is the biggest protective film products used in production is not enough
- Q:nan
- During the processing of protective film, film mulching machine must be used in film mulching. And gravure rotary press can be used in printing the protective film.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Similar products
New products
Hot products
You Might Also Like
