PE protective flim TR-60L
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Total Thickness (adhesives + carrier): 60+10%micron
Colour: Blue
Density 0.95g /cm3
Tensile Strength (Long): >10Mpa
Tensile Strength (Trasv): >8Mpa
Adhesion (to stainless steel):100g/25mm
Elongation at break-MD: >200%
Elogation at break-CD: > 350%
Static Shear 23 DC: >48 hours
Storage: 35 DC
Humidity: 80%
Shelf: 6 months
- Q:Plastic steel doors and windows on the protective film for a long time, aging how to get rid of it?
- (2) be patient for 24 hours.(3) after wiping with a cloth to dry grease, then the protective film has been separated from the plastic doors and windows.(4) remove the protective film with your hands and then peel off.
- Q:Can I use sticky protective film? With sticky protective film and nothing affixed to which aging fast?
- No astringent protective film can be used to maintain this astringent rubber.1, for the surface is very astringent rubber. Except for sweat stains and dirt every day, no detergent is needed and no special maintenance is necessary.
- Q:Mobile phone protection film paste, and then ripped off, but also paste it? How should I post it?
- Not recommended. Because of the tear, his stickiness is gone. And they're all stuck with dust. Bad screen for mobile phones. If you want to post it. Prepare clean, small, clean rags.
- Q:What's the coating for paint?
- Paint protection film generally has PVC and TPU these two types. PVC cheap, but by hardness protection, basically a year to yellow change, cracks, and can not be repaired.
- Q:nan
- I suppose you can't remove the film because you didn't remove it immediately when you bought the door. You can find whether there is a part where the film curls. Apply some essential balm (or other oil) to the part and peel the part off at the same time. Repeating it for several times, you will find it's getting easier to peel. All you need is patience!
- Q:How should the PET protection film identify his viscosity?
- Features 2: good adhesion performance, good solvent resistance, good weather resistance, suitable for use at temperature 150 or so, no residual glue, color separation, clear boundaries.
- Q:nan
- 1. Corona treatment is used in the process of the making of PE protective film, increasing the surface area of the film and making it static to meet the need of the following gluing. It's conducive to the combination of glue and film this way. 2. There's no such PE anti-static protective film with glue itself has adsorption function. Multi-layer film blowing machine can make such product at one time. Hualibao PE protective film features softness, good viscosity and easiness to stick and remove. And no glue remains after it's torn down.
- Q:nan
- The differences between three-layered anti-static protective film and ordinary film? It's simple! 1. To figure out whether the three-layered anti-static protective film and ordinary film are made from PET materials. 2. The three-layered anti-static protective film uses PET sandwich structure which means the middle layer is PET anti-static film and the other two layers are protective film to protect the middle layer of film. At present, this kind of film is usually used to prevent scratches. The anti-static function is produced by silica gel. 3. Ordinary film is not anti-scratch. And it is probably covered with glue.
- Q:Excuse me, what reason is mobile phone protection film stuck to mobile phone screen protect film to be able to bubble?
- There are two kinds of foaming reasons, one is in the air, there are two dust wipe clean, this is all right, the first time I posted OK8 film too, thought is broken, fortunately have posted against the instruction above, teach me how to do, okay, squeezed out is, do not use nail squeeze film will bad ~ Cabu out a card package,
- Q:nan
- It depends on what exact kind of product the customer want. Certain product has certain function and degree of adhesion. 1N or less refers to low degree of adhesion; 1-3N refers to medium degree, and 3N or more, high degree. In addition, there are also slight degree and super degree somewhere.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Similar products
New products
Hot products
You Might Also Like
