Perforated Release film-vacuum infusion process
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 20000 m²/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Perforated Release film
Product Description
Release film is a auxiliary material which is a isolation material in the process of composite production. It can be made into perforated and non perforated types. The perforated type is applied between the composite and suction rubber, and the non perforates type is applied between the suction rubber and molding.
Technique Data
Material:PE
Pore diameter:0.8mm ±0.2mm
Pitch:8mm±0.1mm
Thickness:30μ
Max. working temperature:120 ℃
Tensile strength:>25MPa
Elongation:>200%
Width:≤1.5m ±2mm
Length:600m or According to the request
- Q:nan
- Among them, but the same plastic toughness will decrease, but after entering in 90s, glass fiber plain cloth, with the global glass fiber modified plastics: woven fabric called knitted mat or woven mat, wet mechanical strength shall meet the requirements of glass fiber joints, in line with the State Bureau of building materials in the requirements of the market development strategy. It also can prevent thecrack of the paint.
- Q:nan
- Statin (similar to unidirectional cloth). It is different from the ordinary fabric, but also can be used in the production of glass fiber reinforced, three-dimensional woven fabrics and other forms of three-dimensional fabric. In certain applications will also further roving short cut, as well as for corrosion resistant occasions, which is generally used in glass mat. The shape of a solid fabric is massive. Alkali free glass fiber tape is commonly used in the manufacture of high strength, rectangular, unidirectional fabrics. Single warp fabric is a kind of coarse and fine warp weft four by breaking satin or long satin fabric, wet mechanical strength shall meet the requirements, greatly improves the shear strength of composites and resistance damage tolerance, and then use the barbed needle acupuncture. It is a continuous glass strand by throwing silk device randomly thrown in continuous mesh belt, such as winding, mould. The dumbbell shaped fabric, flat selvedge and weft density; the fabric made of laminated material to avoid the pollution of the process . The fiber in the continuous glass fiber felt is continuous. The most typical braid is a layer of warp and weft overlap together. Glass cloth is mainly used for producing all kinds of electric insulation laminate.
- Q:nan
- The raw materials and technical requirements of producing glass fiber reinforced. As the requirements, the resin in the structure layer of resin producing tower can be unsaturated polyester resin, vinyl resin, epoxy resin. In accordance with the requirements of the use and supply, it could be other suitable resin for winding after negociation. The resin of the corrosion resistant layer of the tower can be, according to the requirements, vinyl resin and epoxy resin. In accordance with the requirements, it may also be other resins with the character of medium corrosion resistance. . Unsaturated polyester resin shall comply with the provisions of GB8237, so as other resins shall comply with the corresponding standard. Usually the resin should not contain pigments, dyes, fillers or coloring.
- Q:nan
- 3) hand paste resin with low molecular weight; 2) glass fiber content can not be too high, carbon fiber, woven roving (cloth) etc.. Although the thick aramid fabric is difficult to be soaked with resin manually. (2) The raw material is unsaturated polyester resin; 2) It can be formed at room temperature. Operate the layer repeatly for several times. (3) the advantage 1) It is suitable for the production of a small amount of solvent. The mechanics and thermal properties are limited because of the high techinicals.
- Q:nan
- The simplest way is melting the glass and steel and then combining them together.
- Q:nan
- Carbon fiber raw materials can be made into fibers and can recovery the carbon. The final products have good mechanical properties.
- Q:nan
- Basically it does not increase the component section, and the increase of the self weight of structures can be ignored, which can ensure it can work with the original reinforced concrete members together and get good reinforcing effect. It is widely used in building structure reinforcement. 2 convenient construction: It boasts less occupied site, no need of large machines, no construction, no fire, no fixed site facilities, high construction efficiency. 3 high durability: It does not rust, and is very suitable for using in high acid, alkali, salt and corrosion environment. Also it has the ferte of high anti fatigue strength, wear resistance, anti-aging, etc.. The characteristics of carbon fiber composite material is a lightweight and high-strength, but processing is difficult. There are great differences among the carbon fiber production which adapt difernent technology, so as to the differences between different trade marks. But it certainly is in terms of strength, toughness and corrosion resistance are higher than the Aluminum Alloy steel and carbon fiber products. Once the damage is hard to repair, such as a piece of carbon fiber composite plate cracking, it must be replaced by a whole plate, but it can not be repaired by welding and other ordinary methods.
- Q:nan
- Q:nan
- Drawing, drying, winding, fabric etc.
- Q:nan
- The process of glass fiber generally includes: Purchase raw materials, mix according to the formula, and then transferred to the glass furnace for melting and refining, after operation channel flow to the bushing, the sizing agent after coating by wire drawing machine traction, then form the original cake, and then flow to the rear section reprocessing procedures (usually a short cut, winding, weaving, puffing and twisting) or sell (direct yarn)
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
Related keywords
You Might Also Like