Solar System Low Price 200AH 100AH lifepo4 Battery Wallmounted NCQ
- Ref Price:
-
- Loading Port:
- SHANGHAI
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 SET
- Supply Capability:
- 100 SET/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Parameters | ||
Product Model | Watt 1-s | Watt 1 |
Nominal Energy | 2.5KWH | 5KWH |
Nominal Voltage | 25.6V | 51.2V |
Nominal Capacity | 100Ah | 100Ah |
Cell Type | LFP | LFP |
Standard Charge Voltage | 29.2V | 58.4V |
Max Charge Current | 100A | 100A |
Discharge Cut-Off Voltage | 20v | 40V |
Max Discharge Current | 100A | 100A |
Parallel Function | Support parallel | Support 15 Units in Parallel |
Communication Interface | No Communication | RS485、RS232、CAN(Optional) |
Calendar Life | 15+Years @25C 80%DOD | |
Cycle Life | ≥6000 Cycles (80%DOD) | |
Charge temperature range | 0~65℃ | |
Discharge temperature range | -20~65℃ | |
Certification | Cell: UL1642/IEC62619/CE/ROHS/ MSDS/UN38.3 Pack: MSDS/UN38.3 | |
Dimensions | 430*600*105mm | 570*690*105mm |
Weight | 28Kg | 46Kg |
Source with confidence
√ Direct from Verified Custom Manufacturer
Application：
Household,Hospital, Bank, Airport, Power plant and other systems.
Solar energy storage cabinet
Long last UPS battery.
Phone switch, Telecom room SMR hospitals.
ADVANTAGES
About 2000-6000 cycles, up to 10 times longer life span compared to lead-acid batteries.
More Usable Capacity
100% depth of discharge (DOD),25-50% more usable capacity than lead-acid batteries.
Lightweight
Average 70% lighter than the same size traditional lead-acid batteries.
Fast &Safe Charge
High charge/discharge rate, charge much faster than traditional lead-acid batteries.
Built-in Protection
Every battery comes with a built-in battery protection system.
Drop-in Replacement
A variety of BCI standard sizes or custom solution for easy drop-in replacement.
Eco-friendly
Ultimate clean energy, no gassing, no fumes, no pollution, on-hazardous batteries.
Order！Order！Order！
CONVENIENT AND BEAUTIFUL ENERGY STORAGE DEVICE, TO ENSURE THAT YOU CAN GET THE LIGHT AT ANY TIME AND PLACE. TO ORDER IT, QUALITY SERVICE, REASONABLE PRICE AND PERFECT AFTER-SALES.
FAQ：
Who are we?
We are based in Beijing, China, start from 2004,sell to all countries. There are more than300 people in our office.
How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
What can you buy from us?
Energy Storage System,Power Storage Battery,Solar Panels,Energy Etorage Battery,LiFePO4 Battery Storage System
Why should you buy from us not from other suppliers?
Focus on the R&D, production and sales of power batteries & energy storage system.
What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDU,Express Delivery；
Accepted Payment Currency:USD,CNY;
Can I have a sample order?
Yes, we welcome sample order to test and check quality.
Would you accept to use our logo ?
All of our products are accepted to print your logo on the enclosure and package box,it depends on the amount, from 200pcs to1000pcs.
What kind of certificate you have ?
CE/TUV/MSDS/ISO/CB/UL/ROHS certificates.etc.
How to choose suitable inverter?
If your load is resistive loads, such as: bulbs, you can choose a modified wave inverter. But if it is inductive loads and capacities loads,we recommend using pure sine wave power inverter.
How do I choose the size of the inverter?
Different types of load demand for power are different. You can view the load power values to determine the size of the power inverter.
- Q:I drive a 2000 Lexus LS400 I was told a sedan consumes less amps than a SUV or pick up
- The bigger the rating the less time you may have to wait before trying to start the car. A low peak amps, CA (cranking amps) or CCA (cold cranking amps) will take longer to give the battery enough juice to start with. Think of a jump pack as a battery charger. If you put a charger on 2 amps it might take all night to fully charge a dead battery. Put it on 15 amps and it might take an hour or so. Put it to 100 amp boost and you're down to a few seconds. Do however remember to check the charge status on the jumper pack regularly. They don't hold a charge forever, and it's embarrasing when you go to give someone a jump only to find the pack is also dead!
- Q:I recently bought a cylindrical battery pack from OKorder and it is apparently made in China. The English translation is bad and it doesn't say how long it takes to get a full charge. The bottom of the cylinder battery says Capacity 2600MAH IN 5V/0 5A OUT 5V/0 5A
- The time required to charge any battery depends on its state of charge at the time charging begins and the applied charging current. Most batteries should be charged at no more than 10% of their Ah rating, so your battery, unless it is specifically intended to accept fast charging, should be charged at about 250 mA (1/4 amp). Thus, a full charge usually requires 10 to 16 hours, and sometimes more. According to the owner's manual, the NiMH battery for my Kenwood TH-K2AT handheld transceiver requires 12 hours to charge.
- Q:I have the Canon Powershot SX30 IS, which came with a Canon Li-Ion battery pack. After a battery fiasco at the TXRenFest, I'm searching for good back up batteries. The battery pack that came with it is a 7.4v, 1050mAh, 7.8Wh. The Canon batteries are so expensive! I've found several others that range from $7 - $15 (Canon is $30 - $70).My question is, will using a non Canon battery hurt my camera?
- Laptop okorder
- Q:I have a Fishman Matrix Infinity pickup, the battery pack was held in place by adhesive but has recently come loose. Any ideas for how to re attach it without using a substance that would damage the guitar?
- You can use velcro. They sell both sides and you can cut it to the right fit. If the glue on the back of the vecro isn't strong enough, you can always use your own glue to make it permanent. Its on the inside, so don't sweat it so much.
- Q:Bought an xbox 360 arcade for the kids for xmas and a second wireless controller for it and the battery packs and charger station both controllers workfine with AA batterys in them yet when we try and use the 2 battery packs that came with the charging station only 1 of them will connect to the console at a time unless I use AA in one of the controllers and one battery pack in the other and it does not matter which controller 1 or 2 as long as we have 1 with AA's and 1 with the rechargeable pack yet we did the connect and they both are connected without using 2 rechargeable packs
- Is it always the same battery pack that is unable to connect? Have you checked, that both battery packs are fully loaded? Put both packs into the charging station and let them charge until the lights both turn green. Normally both controllers should be able to connect correctly.
- Q:I have put together a 4.8v battery pack for a project I am working on. it consists of 20 1.2v 1200mah cells in 5 groups of 4. if I have done my math correctly, the total current output on this should be 24,000 mah or 24 amp hours. since the voltage is 4.8v and when fully charged the volt meter reads 5.2v across the pos and neg terminals. I need to come up with a charger for this battery pack.I figured on basing it on a 8 hour charge schedule having the charger put out a total of 6400 mah or 6.4 amps. my problem is that I don't know how much higher to have the voltage output on the charger. I read somewhere that for each cell that is 1.2v the charger should put out 1.5v to .1.6v is this true or is there another approach?
- sure and perchance watching the layout of the NiCd charger. Older NiCd chargers generally have timers to charge the NiCd. because of the fact the NiMh batteries have a much bigger charge ability, the NiCd charger will undercharge it. The NiCd speedy charger can probably overcharge the NiMH because of the fact it maximum probable won't have the circuitry to end the charge the as quickly as the NiMH is completely charged. If the NiMH gets warm then you definately would be responsive to it rather is being overcharged. The NiCd trickle charger will take too long to absolutely charge a NiMH because of the fact of its larger ability. The greater moderen NiCd chargers might have the smarter circuitry in them to locate optimal charging circumstances. in case you won't be ready to locate for particular in the journey that your charger is any of the above, you are able to attempt and notice what it does on your NiCd battery.
- Q:I was wondering how long these batteries would last in the new camera I was going to buy. If it doesn't have at least a 2 hour life then I wont buy it.
- That's not really a question anyone can answer. When anyone, a company or otherwise tries to give battery life, the answer is always estimate, usually over estimated, and reflects optimum usage patterns etc. If you can find them, look for Sanyo AA Eneloops, which are superior, and hold their charge for a -long- time, whereas NiMH batteries lose 80% of charge after a month roughly.
- Q:I am building a robot and i do not want to use a lead acid battery, one because it is so heavy and two because i need a lot of energy in a some what small area. If you dont think the lithiums would do the job can you tell what would do a better job. Also do you know of any cheep hydrogen power stations. Thank you
- go to popsci dot com. Check how2.0 ( do it your self thing) I remember seeing a project like that a while ago on making your own batteries, just scroll on the archives, it should not be that old. Good luck on your project!!!
- Q:i'm getting a new xbox 360 controller and it's going to be a different color then the white one and i was just wondering if the battery pack worked with the different color.
- They are all compatible with eachother
- Q:Will the battery 18650 battery capacity AH is how to count?
- 18650 battery capacity of 3.7V × 2200mAh = 8.14Wh, which know the three-core battery capacity 8.14 × 3 = 24.42Wh, four-cell battery capacity 8.14 × 4 = 32.56Wh, six-cell battery capacity of 8.14 × 6 = 48.84Wh.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Similar products
New products
Hot products
You Might Also Like
