< >

Steel Grid

Inquire Now Customer Service

Add to My Favorites

*Email

*Password

*Email

*Password

*Repeat Password

*Check Code

I accept the OKorder Membership Agreement

Type	Mode of joints	Equilateral hexagonal type component parts	Sizes of different parts	Height of not /Unit weight	Material	Technical parameters
S	Joints in the same direction	The claws of inner wall are T shape	Sizes of different parts:In accordance with technical specifications of C8.3	20mm(16kg) 25mm(20kg)	Ocr13 Ocr19Ni9 1.75mm	There should be no cracks in the bent angles with a bent radius of R=2mm after the steel strip punched into shape All the structure in the component parts should be steady without anything loose. The mal-position of adjacent sides shall be not more than 0.3mm. The unevenness of component parts shall be less than 3mm/m2
S-1	Joints in the same direction	There has n stclaws in the inner wall
S-2	Joints in the contrary direction	There has claws in the inner wall
S-3	Joins in the same direction	There has claws in the inner wall
S-4	Joints in the same direction	There has claws in the inner wall

Q:What is the minimum diameter of stainless steel wire? Do you have a price smaller than 10 microns? Where can I sell it?: Industrial grade stainless steel wire can only reach 0.05mm, if you want to reach 10 microns, I'm afraid you have to find a special custom manufacturers. Good luck！

Q:What is stainless steel wire drawing tube?: Straight silk is from top to bottom continuous lines, usually fixed wire drawing machine, workpiece before and after movement.

Q:Stainless steel tapping easily broken wire attack, how to do?: In tapping, to tap with people's daily consumption of vinegar, tapping the silk will be quite a lot. In addition, if the tap is not too sharp, do not use it reluctantly, so it is easy to break tap.

Q:Stainless steel wire braided hose, why so much water leakage ah?: Don't shout after you install it. The water pressure is not too high. It won't be bad in general.

Q:Do stainless steel springs need heat treatment?: No. our company produces stainless steel spring wires. After selling them to customers, they only do work hardening and do not do heat treatment. Because stainless steel is different from carbon steel, heat treatment will only be softer.

Q:Elevator hairline stainless steel and wire drawing stainless steel what is the difference between the two costs which expensive ah?: Lift the hairline stainless steel as mentioned above, is a short wire drawing process, the price a little expensive, of course, the price of the elevator itself and less material. The price mainly depends on the level of the elevator: 1, brand and technology, 2, traction machine control cabinet door machine system etc. the advantages and disadvantages of the 3, is the (decoration material is only a small part of the decoration)

Q:What are the uses of stainless steel fiber yarn?: The stainless steel fiber compared with organic and inorganic fibers, with high elasticity, flexibility, flexibility, adhesion, abrasion resistance, high temperature resistance, corrosion resistance, better ventilation, electrical conductivity, magnetic conductivity, thermal conductivity, self-lubricating and sintering. At the same time, stainless steel fiber unique environmental protection and reusable, but also greatly improved its use in social production and life.

Q:When polyurethane insulation, why should use stainless steel wire or steel band fixed?: When the pipe is vertical or with an angle not greater than 45 degrees, the bearing ring shall be provided. The width of the bearing ring steel belt shall be 2/3 of the thickness of the insulating layer. Set one every 2 meters.

Q:Is stainless steel drawing panel stainless steel?: Stainless steel (Stainless, Steel) refers to air, steam, water and other weak corrosive medium and acid, alkali, salt and other chemical corrosive medium corrosion of steel, also known as stainless acid resistant steel. In practical application, the steel which is often corroded by weak corrosive medium is called stainless steel, and the steel which is resistant to chemical medium is called acid resisting steel. Because of the difference in chemical composition between the two, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally stainless. The corrosion resistance of stainless steel depends on the alloying elements contained in the steel.

Q:How about 3 mm diameter stainless steel wire welding?: After all bending, use resistance welding, also known as contact welding. If it is made of a single piece, use gas protection to weld the solder joint.

3. Manufacturer Capability
a)Trade Capacity
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range

Send your message to us

Telephone

Quantity

Unit

Company

- Self introduction

- Required specifications

- Inquire about price/MOQ

This is not what you are looking for? Post Buying Request

1. Manufacturer Overview