Vacuum Bagging Film-vacuum infusion process
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 1000000 m²/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Vacuum Bagging Film
Product Description
Vacuum bagging film is widely used in the composites industry, in vacuum infusion process, vacuum bagging pressure process and autoclave process. It is a technique in which you create uniform pressure to the surfaces of the obiect inside of a bag, holding parts together while the adhesive cures. Pressurizing a composite lamination serves several functions. It removes any trapped air between layers and provides pressure that prevents shifting of fiber orientation during cure. It also reduces humidity and improves the fiber-to-resin ratio in the composite part.
Technique Data
Temperature：150℃
Thickness：65μm,50μm,75μm
Width：≤14m
Length：Tailored
Density：1
Colour：yellow
Longitudinal Tensile Strength：>35MPA
Tensile Strength crosswise：>40MPA
Longitudinal elongation：>300%
Elongation crosswise：>350%
- Q:What are the applicable industries of corner labeling machines?
- Applicable products: all kinds of cartons, such as poker boxes, mobile phone packaging boxes, etc.. And widely used in printing, food, daily chemicals, electronics, medicine and other industries.
- Q:What's the corner line?
- The composition and content of the corner line body are as follows: (weight percentage): unsaturated polyester resin 22 to 70%; filler 28 to 74%; curing agent 0.1.5%; promoter 0.1.5%; pigment 0.2%.
- Q:Does it need extra money to decorate the corner of the plaster line?
- This is extra. Corner and corner are 2. The corner is more expensive than the corner line
- Q:Gypsum wire installation dimension, 10 cm corner line, how many corners should be removed?
- The utility model has the functions of fire protection, moisture proof, heat insulation, sound insulation and heat insulation, and can play luxurious decorative effect. Department of tightness gypsum cementitious materials, gypsum relief decoration products must have the appropriate thickness, in order to ensure that the molecular affinity between the optimal level, so as to ensure the service life and in the period of use of the integrity and security. If the gypsum relief decorative products are too thin, not only the use of a short duration, but also affect safety.
- Q:3.2*2.5 meters cloakroom, in the corner of the section how to deal with? How about making a corner with each other?
- The size of the wall is suitable for the size of the product, the depth is 65cm if the wardrobe, businesses have exactly 2.5 meters of products, walls 2.5 meters to 2.5 meters, 3.2 meters of wall removed 65cm, with 2.55 meters, 2.5 meters of products can also be arranged. The corner has been made good use of.
- Q:Large angle hinge is used at the corner of the cabinet
- If it's on the corner counter, there's no problem with the 270 degree hinge!
- Q:What skills do you have in turning corners and corners of integrated wiring?
- Construction method without curved bend angle joint. A curved corner joint is used when the line slot needs to be bent at 90 degrees.
- Q:Shops corner how to decorate?
- Just make a publicity campaign based on your product
- Q:How to solve the corner problem in the kitchen basket?
- The utility model can not only maximize the use of the built-in space, but also make full use of the waste space at the corner so as to maximize the use value.
- Q:The steering angle sensor, how to replace the resolute
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Similar products
New products
Hot products
You Might Also Like
